bxl
正常导入可以观看
https://v.youku.com/v_show/id_XMjczNjMzMDE2OA==.html?from=y1.7-2&spm=a2hzp.8253869.0.0#paction
文字方法参考如下
https://jingyan.baidu.com/article/48b558e326e1b17f39c09a57.html
错误处理使用下面
//通过修改上面这行中的分隔符，同时在执行过程中屏蔽 Model := STEPmodel.ModelFactory_FromFilename(STEPFileName, false); 再打开这行 就可生成封装库
{==============================================================================}
{==== String Utility Routines ===============================================}
{==============================================================================}
Function CheckLeft(BaseStr: String, Srch: String): Boolean;
Var
i : integer;
Begin
Result := False;
i := Length(Srch);
If Length(BaseStr) < i Then Exit;
If Copy(BaseStr, 1, i) = Srch Then Result := True;
End;
Function LeftOf(BaseStr: String, Srch: String): String;
Var
i : Integer;
Begin
i := Pos(Srch, BaseStr);
If i > 0 Then Begin
Result := Copy(BaseStr, 1, i - 1);
End Else Begin
Result := BaseStr;
End;
End;
Function RightOf(BaseStr: String, Srch: String): String;
Var
i, ls : Integer;
Begin
i := Pos(Srch, BaseStr);
If i > 0 Then Begin
ls := Length(Srch);
Result := Copy(BaseStr, i + ls, Length(BaseStr) - i + ls);
End Else Begin
Result := '';
End;
End;
Procedure StrChop(BaseStr: String, Srch: String, Out LeftSide: String, Out RightSide: String);
Var
i, ls : Integer;
Begin
i := Pos(Srch, BaseStr);
If i <= 0 Then Begin
LeftSide := BaseStr;
RightSide := '';
End Else Begin
ls := Length(Srch);
LeftSide := Copy(BaseStr, 1, i - 1);
RightSide := Copy(BaseStr, i + ls, Length(BaseStr) - i + ls);
End;
End;
Function GetBetween(BaseStr: String, StartStr: String, EndStr: String): String;
Begin
Result := Leftof(RightOf(BaseStr, StartStr), EndStr);
End;
Function GetFileLocation(FilePath: String): String;
Var
i : Integer;
filename : String;
Begin
filename := RightOf(FilePath, '\');
i := Pos('\', filename);
while i > 0 Do Begin
filename := RightOf(filename, '\');
i := Pos('\', filename);
End;
Result := LeftOf(Filepath, filename);
End;
{==============================================================================}
{==== Footprint Routines ====================================================}
{==============================================================================}
Function LayerFromString(LName: String): TLayer;
Begin
Case LName Of
'NoLayer': Result := eNoLayer;
'TopLayer': Result := eTopLayer;
'MidLayer1': Result := eMidLayer1;
'MidLayer2': Result := eMidLayer2;
'MidLayer3': Result := eMidLayer3;
'MidLayer4': Result := eMidLayer4;
'MidLayer5': Result := eMidLayer5;
'MidLayer6': Result := eMidLayer6;
'MidLayer7': Result := eMidLayer7;
'MidLayer8': Result := eMidLayer8;
'MidLayer9': Result := eMidLayer9;
'MidLayer10': Result := eMidLayer10;
'MidLayer11': Result := eMidLayer11;
'MidLayer12': Result := eMidLayer12;
'MidLayer13': Result := eMidLayer13;
'MidLayer14': Result := eMidLayer14;
'MidLayer15': Result := eMidLayer15;
'MidLayer16': Result := eMidLayer16;
'MidLayer17': Result := eMidLayer17;
'MidLayer18': Result := eMidLayer18;
'MidLayer19': Result := eMidLayer19;
'MidLayer20': Result := eMidLayer20;
'MidLayer21': Result := eMidLayer21;
'MidLayer22': Result := eMidLayer22;
'MidLayer23': Result := eMidLayer23;
'MidLayer24': Result := eMidLayer24;
'MidLayer25': Result := eMidLayer25;
'MidLayer26': Result := eMidLayer26;
'MidLayer27': Result := eMidLayer27;
'MidLayer28': Result := eMidLayer28;
'MidLayer29': Result := eMidLayer29;
'MidLayer30': Result := eMidLayer30;
'BottomLayer': Result := eBottomLayer;
'Topoverlay': Result := eTopOverlay;
'BottomOverlay': Result := eBottomOverlay;
'TopPaste': Result := eTopPaste;
'BottomPaste': Result := eBottomPaste;
'TopSolder': Result := eTopSolder;
'BottomSolder': Result := eBottomSolder;
'InternalPlane1': Result := eInternalPlane1;
'InternalPlane2': Result := eInternalPlane2;
'InternalPlane3': Result := eInternalPlane3;
'InternalPlane4': Result := eInternalPlane4;
'InternalPlane5': Result := eInternalPlane5;
'InternalPlane6': Result := eInternalPlane6;
'InternalPlane7': Result := eInternalPlane7;
'InternalPlane8': Result := eInternalPlane8;
'InternalPlane9': Result := eInternalPlane9;
'InternalPlane10': Result := eInternalPlane10;
'InternalPlane11': Result := eInternalPlane11;
'InternalPlane12': Result := eInternalPlane12;
'InternalPlane13': Result := eInternalPlane13;
'InternalPlane14': Result := eInternalPlane14;
'InternalPlane15': Result := eInternalPlane15;
'InternalPlane16': Result := eInternalPlane16;
'DrillGuide': Result := eDrillGuide;
'KeepOutLayer': Result := eKeepOutLayer;
'Mechanical1': Result := eMechanical1;
'Mechanical2': Result := eMechanical2;
'Mechanical3': Result := eMechanical3;
'Mechanical4': Result := eMechanical4;
'Mechanical5': Result := eMechanical5;
'Mechanical6': Result := eMechanical6;
'Mechanical7': Result := eMechanical7;
'Mechanical8': Result := eMechanical8;
'Mechanical9': Result := eMechanical9;
'Mechanical10': Result := eMechanical10;
'Mechanical11': Result := eMechanical11;
'Mechanical12': Result := eMechanical12;
'Mechanical13': Result := eMechanical13;
'Mechanical14': Result := eMechanical14;
'Mechanical15': Result := eMechanical15;
'Mechanical16': Result := eMechanical16;
'DrillDrawing': Result := eDrillDrawing;
'MultiLayer': Result := eMultiLayer;
'ConnectLayer': Result := eConnectLayer;
'BackGroundLayer': Result := eBackGroundLayer;
'DRCERRORLayer': Result := eDRCErrorLayer;
'HighlightLayer': Result := eHighlightLayer;
'Gridcolor1': Result := eGridColor1;
'GridColor10': Result := eGridColor10;
'PadHoleLayer': Result := ePadHoleLayer;
'ViaHoleLayer': Result := eViaHoleLayer;
Else
Result := eNoLayer;
End;
End;
Procedure FP_AddStep(fp: IPCB_Libcomponent, Data: String, InFileName: String);
Var
STEPFileName : String;
STEPmodel : IPCB_Componentbody;
Model : IPCB_Model;
Begin
//STEPFileName := GetFileLocation(InFileName) + '\' + GetBetween(Data, '(Name ', ')');
//通过修改上面这行中的分隔符，同时在执行过程中屏蔽 Model := STEPmodel.ModelFactory_FromFilename(STEPFileName, false); 再打开这行 就可生成封装库
STEPFileName := GetFileLocation(InFileName) + GetBetween(Data, '(Name ', ')');
STEPmodel := PcbServer.PCBObjectFactory(eComponentBodyObject,eNoDimension,eCreate_Default);
//Model := STEPmodel.ModelFactory_FromFilename(STEPFileName, false);
Model := STEPmodel.ModelFactory_FromFilename(STEPFileName, false);
STEPmodel.SetState_FromModel;
// Model.SetState(0,0,0,0);
STEPmodel.Model := Model;
fp.AddPCBObject(STEPmodel);
//PCBServer.SendmessageTorobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, arc.I_ObjectAddress);
End;
Procedure FP_AddLine(fp: IPCB_Component, Data: String);
Var
lin : IPCB_track;
s1, s2 : String;
Begin
lin := PCBServer.PCBObjectFactory(eTrackObject, eNoDimension, eCreate_Default);
If lin = Nil Then Exit;
StrChop(GetBetween(Data, '(Start ', ')'), ',', s1, s2);
lin.X1 := MilsToCoord(Evaluate(s1));
lin.Y1 := MilsToCoord(Evaluate(s2));
StrChop(GetBetween(Data, '(End ', ')'), ',', s1, s2);
lin.X2 := MilsToCoord(Evaluate(s1));
lin.Y2 := MilsToCoord(Evaluate(s2));
lin.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
lin.Width := MilsToCoord(Evaluate(GetBetween(Data, '(Width ', ')')));
fp.AddPCBObject(lin);
PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, lin.I_ObjectAddress);
End;
Procedure FP_AddArc(fp: IPCB_Component, Data: String);
Var
arc : IPCB_Arc;
s1, s2 : String;
Begin
arc := PCBServer.PCBObjectFactory(eArcObject, eNoDimension, eCreate_Default);
If arc = Nil Then Exit;
StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
arc.XCenter := MilsToCoord(Evaluate(s1));
arc.YCenter := MilsToCoord(Evaluate(s2));
arc.Radius := MilsToCoord(Evaluate(GetBetween(Data, '(Radius ', ')')));
arc.LineWidth := MilsToCoord(Evaluate(GetBetween(Data, '(Width ', ')')));
arc.StartAngle := Evaluate(GetBetween(Data, '(StartAngle ', ')'));
arc.EndAngle := Evaluate(GetBetween(Data, '(EndAngle ', ')'));
arc.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));;
fp.AddPCBObject(arc);
PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, arc.I_ObjectAddress);
End;
Procedure FP_AddPoly(fp: IPCB_Component, Data: String, InFile: TextFile);
Var
pol : IPCB_Region;
cont : IPCB_Contour;
pc: Integer;
s1, s2, inp, tag : String;
Begin
pol := PCBServer.PCBObjectFactory(eRegionObject, eNoDimension,eCreate_Default);
If pol = Nil Then Exit;
cont := pol.MainContour.Replicate();
pol.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
cont.Count := Evaluate(GetBetween(Data, '(PointCount ', ')'));
pc := 0;
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
inp := Trim(inp);
StrChop(inp, ' ', tag, inp);
tag := Trim(tag);
Case tag Of
'Point': Begin
pc := pc + 1;
StrChop(GetBetween(inp, '(', ')'), ',', s1, s2);
cont.X[pc] := MilsToCoord(Evaluate(s1));
cont.Y[pc] := MilsToCoord(Evaluate(s2));
End;
'EndPolygon': Break;
Else Begin
ShowMessage('Keyword Error: ' + tag);
End;
End;
End;
pol.SetOutlineContour(cont);
If GetBetween(Data, '(Type ', ')') = 'KeepOut' Then Begin
pol.IsKeepout := True;
End;
fp.AddPCBObject(pol);
PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, pol.I_ObjectAddress);
End;
Procedure FP_AddText(fp: IPCB_Component, Data: STring);
Var
txt : IPCB_Text;
s1, s2 : String;
Begin
txt := PCBServer.PCBObjectFactory(eTextObject, eNoDimension, eCreate_Default);
If txt = Nil Then Exit;
StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
txt.XLocation := MilsToCoord(Evaluate(s1));
txt.YLocation := MilsToCoord(Evaluate(s2));
txt.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
txt.Size := MilsToCoord(Evaluate(GetBetween(Data, '(Height ', ')')));
txt.Width := MilsToCoord(Evaluate(GetBetween(Data, '(Width ', ')')));
If GetBetween(Data, '(Mirrored ', ')') = 'True' Then Begin
txt.MirrorFlag := True;
End;
txt.Rotation := Evaluate(GetBetween(Data, '(Rotation ', ')'));
txt.Text := GetBetween(Data, '(Value "', '")');
// Justification? NOTE: TODO:
fp.AddPCBObject(txt);
PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, txt.I_ObjectAddress);
End;
Procedure FP_AddPad(fp: IPCB_Component, Data: String, InFile: TextFile);
Var
s1, s2, inp, tag, lay : String;
pad : IPCB_Pad;
padsh : TShape;
cache : TPadCache;
Begin
pad := PcbServer.PCBObjectFactory(ePadObject, eNoDimension, eCreate_Default);
pad.Name := GetBetween(Data, '(Name "', '")');
// pad.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
pad.X := MilsToCoord(Evaluate(s1));
pad.Y := MilsToCoord(Evaluate(s2));
pad.Rotation := Evaluate(GetBetween(Data, '(Rotation ', ')')); // 2010-07-06 gbn
// pad.Mode := ePadMode_localStack; // ePadMode_Simple, ePadMode_ExternalStack
s1 := GetBetween(Data, '(ExpandPaste ', ')');
s2 := GetBetween(Data, '(ExpandMask ', ')');
If s1 <> '' || s2 <> '' Then Begin
cache := pad.Cache;
If s1 <> '' Then Begin
cache.pastemaskExpansionvalid := eCacheManual;
cache.PasteMaskExpansion := MilsToCoord(Evaluate(s1));
End;
If s2 <> '' Then Begin
cache.SolderMaskExpansionValid := eCacheManual;
cache.SolderMaskExpansion := MilsToCoord(Evaluate(s2));
End;
pad.Cache := cache;
End;
If GetBetween(Data, '(Surface ', ')') = 'True' Then Begin
pad.Mode := ePadMode_Simple;
pad.Layer := eTopLayer;
End Else Begin
pad.Mode := ePadMode_LocalStack;
End;
pad.HoleType := eRoundHole; // eSquareHole, eSlotHole
pad.HoleSize := MilsToCoord(Evaluate(GetBetween(Data, '(HoleSize ', ')')));
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
inp := Trim(inp);
StrChop(inp, ' ', tag, inp);
tag := Trim(tag);
Case tag Of
'PadShape': Begin
padsh := eNoShape;
StrChop(GetBetween(inp, '(Size ', ')'), ',', s1, s2);
Case GetBetween(inp, '(Shape ', ')') Of
'NoShape': padsh := eNoShape;
'Rounded': padsh := eRounded;
'Rectangular': padsh := eRectangular;
'Octagonal': padsh := eOctagonal;
'CircleShape': padsh := eCircleShape;
'ArcShape': padsh := eArcShape;
'Terminator': padsh := eTerminator;
'RoundedRectangle': padsh := eRoundedRectangular;
'RotatedRectangle': padsh := eRotatedRectShape;
Else padsh := eNoShape;
End;
lay := GetBetween(inp, '(Layer ', ')');
If CheckLeft(lay, 'Top') Then Begin
pad.TopShape := padsh;
pad.TopXSize := MilsToCoord(Evaluate(s1));
pad.TopYSize := MilsToCoord(Evaluate(s2));
End Else If CheckLeft(lay, 'Mid') Then Begin
pad.MidShape := padsh;
pad.MidXSize := MilsToCoord(Evaluate(s1));
pad.MidYSize := MilsToCoord(Evaluate(s2));
End Else If CheckLeft(lay, 'Bot') Then Begin
pad.BotShape := padsh;
pad.BotXSize := MilsToCoord(Evaluate(s1));
pad.BotYSize := MilsToCoord(Evaluate(s2));
End;
End;
'EndPad': Begin
Break;
End;
Else Begin
ShowMessage('keyword Error: ' + tag);
End;
End;
End;
fp.AddPCBObject(pad);
PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, pad.I_ObjectAddress);
End;
Procedure ImportFootprints(InFile: TextFile, Lib: IPCB_Library, Errors: TStringList, InFileName : String);
Var
inp, tag, s, t : String;
fp : IPCB_Component;
Begin
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
inp := Trim(inp);
StrChop(inp, ' ', tag, inp);
tag := Trim(tag);
Case tag Of
'Footprint': Begin
// create a footprint reference
fp := PCBServer.CreatePCBLibComp();
If fp = Nil Then Begin
Errors.Add('Error creating footprint.');
Break;
End;
// add data to it
fp.Name := GetBetween(inp, '(Name "', '")');
// assign it to library
Lib.RegisterComponent(fp);
PCBServer.PreProcess();
// add data to it
fp.BeginModify();
// set height
t := GetBetween(inp, '(Height ', ')');
If t <> '' Then Begin
fp.Height := MilsToCoord(Evaluate(t));
End;
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
inp := Trim(inp);
If CheckLeft(inp, '#') Then Continue;
StrChop(inp, ' ', tag, inp);
tag := Trim(tag);
Case tag Of
'Pad': Begin
FP_AddPad(fp, inp, InFile);
End;
'Line': Begin
FP_AddLine(fp, inp);
End;
'Arc': Begin
FP_AddArc(fp, inp);
End;
'Polygon': Begin
FP_AddPoly(fp, inp, InFile);
End;
'Text': Begin
FP_AddText(fp, inp);
End;
'Step': Begin
FP_AddStep(fp, inp, InFileName);
End;
'EndFootprint': Begin
//ShowMessage('EndFootprint');
Break;
End;
'': Continue;
Else Begin
ShowMessage('Keyword Error: ' + tag);
Break;
End;
End;
End; // while not eof()
fp.EndModify();
PCBServer.PostProcess();
// done with footprint
End;
'EndFootprints': Begin
//ShowMessage('EndFootprint');
Break;
End;
'': Continue;
Else Begin
ShowMessage('Keyword Error: ' + tag);
Break;
End;
End; // case tag
End; // while not eof()
PCBServer.PostProcess();
End;
{==============================================================================}
{==== symbol Routines =======================================================}
{==============================================================================}
Function TextJustificationFromString(Value: String): TTextJustification;
Begin
Case Value Of
'BottomLeft': Result := eJustify_BottomLeft;
'BottomCenter': Result := eJustify_BottomCenter;
'BottomRight': Result := eJustify_BottomRight;
'CenterLeft': Result := eJustify_CenterLeft;
'Center': Result := eJustify_Center;
'CenterRight': Result := eJustify_CenterRight;
'TopLeft': Result := eJustify_TopLeft;
'TopCenter': Result := eJustify_TopCenter;
'TopRight': Result := eJustify_TopRight;
Else Result := eJustify_Center;
End;
End;
Function SY_GetFont(Height: Double, Angle: TRotationBy90): TFontID;
Var
sz : Integer;
Begin
// 2012-11-07 gbn start
{ sz := Round(Height / 10);
According to this page's bugs 4604 and 5552, Altium 10.890.23450 may have this fixed.
http://wiki.altium.com/pages/viewpage.action?pageId=34210039
}
sz := (Height * 0.1);
// 2012-11-07 gbn end
Result := SchServer.FontManager.GetFontID(sz, Angle, False, False, False, False, 'Courier New');
End;
Function SY_GetAngle(Angle : String): TRotationBy90;
Begin
Case Angle Of
'90': Result := eRotate90;
'180': Result := eRotate180;
'270': Result := eRotate270;
Else Result := eRotate0;
End;
End;
Procedure SY_AddLine(sy: ISch_Component, Data: String);
Var
lin : ISch_Line;
s1, s2 ,s3: String;
Begin
lin := SchServer.SchObjectFactory(eLine, eCreate_Default);
If lin = Nil Then Exit;
StrChop(GetBetween(Data, '(Start ', ')'), ',', s1, s2);
lin.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
StrChop(GetBetween(Data, '(End ', ')'), ',', s1, s2);
lin.Corner := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
GetBetween(Data, 'Width ', ')');
If s3 < 10 Then Begin
lin.LineWidth := eSmall;
End;
If s3 > 10 Then Begin
lin.LineWidth := emedium;
End;
If s3 > 12 Then Begin
lin.LineWidth := eLarge;
End;
lin.LineStyle := eLineStyleSolid;
lin.Color := $000000; // NOTE: TODO:
lin.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
lin.OwnerPartdisplayMode := sy.DisplayMode;
sy.AddSchObject(lin);
SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, lin.I_ObjectAddress);
End;
Procedure SY_AddRect(sy: ISch_Component, Data: String);
Var
rect : ISch_Rectangle;
s1, s2 ,s3: String;
Begin
rect := SchServer.SchObjectFactory(eRectangle, eCreate_Default);
If rect = Nil Then Exit;
StrChop(GetBetween(Data, '(Start ', ')'), ',', s1, s2);
rect.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
StrChop(GetBetween(Data, '(End ', ')'), ',', s1, s2);
rect.Corner := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
GetBetween(Data, 'Width ', ')');
s3 := GetBetween(Data, '(Width ', ')');
If s3 < 10 Then Begin
rect.LineWidth := eSmall;
End;
If s3 > 10 Then Begin
rect.LineWidth := eMedium;
End;
If s3 > 12 Then Begin
rect.LineWidth := eLarge;
End;
rect.Transparent := True;
rect.Color := $000000; // NOTE: TODO:
rect.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
rect.OwnerPartDisplayMode := sy.DisplayMode;
sy.AddSchObject(rect);
SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, rect.I_ObjectAddress);
End;
Procedure SY_AddArc(sy: ISch_Component, Data: String);
Var
arc : ISch_Arc;
s1, s2, s3 : String;
Begin
arc := SchServer.SchObjectFactory(eArc, eCreate_Default);
If arc = Nil Then Exit;
StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
arc.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
arc.Radius := MilsToCoord(Evaluate(GetBetween(Data, '(Radius ', ')')));
s3 := GetBetween(Data, '(Width ', ')');
If s3 < 10 Then Begin
arc.LineWidth := eSmall;
End;
If s3 > 10 Then Begin
arc.LineWidth := eMedium;
End;
If s3 > 12 Then Begin
arc.LineWidth := eLarge;
End;
arc.Color := $000000; // NOTE: TODO:
arc.StartAngle := Evaluate(GetBetween(Data, '(StartAngle ', ')'));
arc.EndAngle := Evaluate(GetBetween(Data, '(EndAngle ', ')'));
arc.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
arc.OwnerPartDisplayMode := sy.DisplayMode;
sy.AddSchObject(arc);
SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, arc.I_ObjectAddress);
End;
Procedure SY_AddPoly(sy: ISch_Component, Data: String, InFile: TextFile);
Var
pol : ISch_Polygon;
pc: Integer;
s1, s2, inp, tag : String;
Begin
pol := SchServer.SchObjectFactory(ePolygon, eCreate_Default);
If pol = Nil Then Exit;
pol.VerticesCount := Evaluate(GetBetween(Data, '(PointCount ', ')'));
pc := 0;
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
inp := Trim(inp);
StrChop(inp, ' ', tag, inp);
tag := Trim(tag);
Case tag Of
'Point': Begin
pc := pc + 1;
StrChop(GetBetween(inp, '(', ')'), ',', s1, s2);
pol.Vertex[pc] := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
End;
'EndPolygon': Break;
Else Begin
ShowMessage('Keyword Error: ' + tag);
End;
End;
End;
pol.LineWidth := eZeroSize; // NOTE: TODO:
pol.Color := $000000; // NOTE: TODO:
pol.IsSolid := True;
pol.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
pol.OwnerPartDisplayMode := sy.DisplayMode;
sy.AddSchObject(pol);
SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, pol.I_ObjectAddress);
End;
Procedure SY_AddText(sy: ISch_Component, Data: String);
Var
txt : ISch_Label;
s1, s2 : String;
Begin
txt := SchServer.SchObjectFactory(eLabel, eCreate_Default);
If txt = Nil Then Exit;
StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
txt.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
If GetBetween(Data, '(Mirrored ', ')') = 'True' Then Begin
txt.IsMirrored := True;
End;
txt.Orientation := SY_GetAngle(GetBetween(Data, '(Rotation ', ')'));
txt.FontID := SY_GetFont(Evaluate(GetBetween(Data, 'Height ', ')')), txt.Orientation);
txt.Justification := TextJustificationFromString(GetBetween(Data, '(Justification ', ')'));
txt.Color := $000000; // NOTE: TODO:
txt.Text := GetBetween(Data, '(Value "', '")');
txt.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
txt.OwnerPartDisplayMode := sy.DisplayMode;
sy.AddSchObject(txt);
SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, txt.I_ObjectAddress);
End;
Procedure SY_AddParam(sy: ISch_Component, Data: String);
Var
prm : ISch_parameter;
s1, s2: String;
Begin
prm := SchServer.SchObjectFactory(eParameter, eCreate_Default);
If prm = Nil Then Exit;
prm.Ishidden := True;
If GetBetween(Data, '(Name ', '"') = 'Visible' Then Begin
prm.IsHidden := False;
End;
prm.Name := GetBetween(Data, '(Name "', '")');
StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
prm.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
If GetBetween(Data, '(Mirrored ', ')') = 'True' Then Begin
prm.IsMirrored := True;
End;
prm.Orientation := SY_GetAngle(GetBetween(Data, '(Rotation ', ')'));
prm.FontID := SY_GetFont(Evaluate(GetBetween(Data, 'Height ', ')')), prm.Orientation);
prm.Justification := TextJustificationFromString(GetBetween(Data, '(Justification ', ')'));
prm.Color := $000000; // NOTE: TODO:
prm.Text := GetBetween(Data, '(Value "', '")');
prm.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
prm.OwnerPartDisplayMode := sy.DisplayMode;
sy.AddSchObject(prm);
SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, prm.I_ObjectAddress);
End;
Procedure SY_AddPin(sy: ISch_Component, Data: String);
Var
pin : ISch_Pin;
s1, s2 : String;
Begin
pin := SchServer.SchObjectFactory(ePin, eCreate_Default);
If pin = Nil Then Exit;
// define the pin parameters.
StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
pin.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
pin.Color := $000000; // NOTE: TODO:
pin.Orientation := SY_GetAngle(GetBetween(Data, '(Rotation ', ')'));
Case GetBetween(Data, '(PinType ', ')') Of
'IO': pin.Electrical := eElectricIO;
'Input': pin.Electrical := eElectricInput;
'Output': pin.Electrical := eElectricOutput;
'Passive': pin.Electrical := eElectricPassive;
'OpenCollector': pin.Electrical := eElectricOpenCollector;
'OpenEmitter': pin.Electrical := eElectricOpenEmitter;
'HiZ': pin.Electrical := eElectricHiZ;
'Power': pin.Electrical := eElectricPower;
Else pin.Electrical := eElectricPassive;
End;
pin.PinLength := MilsToCoord(Evaluate(GetBetween(Data, '(Length ', ')')));
pin.SwapId_Pin := GetBetween(Data, '(PinSwap ', ')');
pin.SwapId_Part := GetBetween(Data, '(PartSwap ', ')');
pin.SwapId_PartPin := GetBetween(Data, '(PinSeq ', ')');
s1 := GetBetween(Data, '(Designator ', '")');
pin.ShowDesignator := CheckLeft(s1, 'Visible');
pin.Designator := RightOf(s1, '"');
s1 := GetBetween(Data, '(Name ', '")');
pin.ShowName := CheckLeft(s1, 'Visible');
pin.Name := RightOf(s1, '"');
pin.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
pin.OwnerPartDisplayMode := sy.DisplayMode;
sy.AddSchObject(pin);
SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, pin.I_ObjectAddress);
End;
Procedure ImportComponents(InFile: TextFile, Lib: ISch_Document, Errors: TStringList);
Var
inp, tag, s, t : String;
sy : ISch_Component;
simp : ISch_Implementation;
Begin
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
StrChop(inp, ' ', tag, inp);
tag := Trim(tag);
Case tag Of
'Component': Begin
// create a component reference
sy := SchServer.SchObjectFactory(eSchComponent, eCreate_Default);
If sy = Nil Then Begin
Errors.Add('Error creating component.');
Break;
End;
// Set up parameters for the library component.
SchServer.ProcessControl.PreProcess(Lib, '');
// Define the LibReference and add the component to the library.
sy.LibReference := GetBetween(inp, '(Name "', '")');
sy.Designator.Text := GetBetween(inp, '(DesPrefix "', '")');
sy.ComponentDescription := 'Imported';
sy.PartCount := Evaluate(GetBetween(inp, '(PartCount ', ')'));
sy.CurrentPartId := 1;
// add data to it
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
StrChop(inp, ' ', tag, inp);
Case tag Of
'Parameter': Begin
SY_AddParam(sy, inp);
End;
'Pin': Begin
SY_AddPin(sy, inp);
End;
'Line': Begin
SY_AddLine(sy, inp);
End;
'Rectangle': Begin
SY_AddRect(sy, inp);
End;
'Arc': Begin
SY_AddArc(sy, inp);
End;
'Polygon': Begin
SY_AddPoly(sy, inp, InFile);
End;
'Text': Begin
SY_AddText(sy, inp);
End;
'Footprint': Begin
simp := sy.AddSchImplementation();
simp.ModelName := GetBetween(inp, '(Name "', '")');
simp.ModelType := cDocKind_PcbLib;
simp.AddDataFileLink(simp.ModelName, '', cDocKind_PcbLib);
simp.Mapasstring := GetBetween(inp, '(Map "', '")');
End;
'EndComponent': Begin
Lib.AddSchComponent(sy);
// Send a system notification that a new component has been added to the library.
SchServer.RobotManager.SendMessage(Lib.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, sy.I_ObjectAddress);
Lib.CurrentSchComponent := sy;
Break;
End;
'': Continue;
Else Begin
ShowMessage('Keyword Error: ' + tag);
Break;
End;
End;
End; // while not eof()
// done with component
SchServer.ProcessControl.PostProcess(Lib, '');
End;
'EndComponents': Begin
Break;
End;
'': Continue;
Else Begin
ShowMessage('Keyword Error: ' + tag);
Break;
End;
End; // case tag
End; // while not eof()
End;
{==============================================================================}
{==== Main Routines =========================================================}
{==============================================================================}
Function InitLibDocs(BasePath: String,
Out Proj : IProject,
Out ProjDoc : IServerDocument,
Out PcbLibDoc : IServerDocument,
Out SchLibDoc : IServerDocument,
Out pLib : IPCB_Library,
Out sLib : ISch_Document): Boolean;
Var
WorkSpace : IWorkSpace;
Begin
Result := False;
WorkSpace := GetWorkSpace;
If WorkSpace = Nil Then Begin
ShowMessage('Nil WorkSpace');
Exit;
End;
// Integrated library, and the project it creates
ProjDoc := Client.OpenNewDocument(cDocKind_IntegratedLibrary, 'UL_Imported_Lib', 'UL_Imported_Lib', False);
If ProjDoc = Nil Then Begin
ShowMessage('Nil ProjDoc');
Exit;
End;
If Not ProjDoc.DoSafeChangeFileNameAndSave(BasePath + '.LibPkg', cDocKind_IntegratedLibrary) Then Begin
ShowMessage('ProjDoc Save failed');
Exit;
End;
Proj := WorkSpace.DM_GetProjectFromPath(BasePath + '.LibPkg');
If Proj = Nil Then Begin
ShowMessage('Nil Proj');
Exit;
End;
// Footprint library
PcbLibDoc := Client.OpenNewDocument(cDocKind_PcbLib, 'UL_Footprints', 'UL_Footprints', False);
If PcbLibDoc = Nil Then Begin
ShowMessage('Nil PcbLibDoc');
Exit;
End;
If Not PcbLibDoc.DoSafeChangeFileNameAndSave(BasePath + '.PcbLib', cDocKind_PcbLib) Then Begin
ShowMessage('PcbLibDoc Save failed');
Exit;
End;
Proj.DM_AddSourceDocument(BasePath + '.PcbLib');
pLib := PCBServer.GetPCBLibraryByPath(BasePath + '.PcbLib');
If pLib = Nil Then Begin
ShowMessage('Nil pLib');
Exit;
End;
// Symbol Library
SchLibDoc := Client.OpenNewDocument(cDocKind_SchLib, 'UL_Components', 'UL_Components', False);
If SchLibDoc = Nil Then Begin
ShowMessage('Nil SchLibDoc');
Exit;
End;
If Not SchLibDoc.DoSafeChangeFileNameAndSave(BasePath + '.SchLib', cDocKind_SchLib) Then Begin
ShowMessage('SchLibDoc Save failed');
Exit;
End;
Proj.DM_AddSourceDocument(BasePath + '.SchLib');
sLib := SchServer.GetSchDocumentByPath(BasePath + '.SchLib');
If sLib = Nil Then Begin
ShowMessage('Nil sLib');
Exit;
End;
// Done
Result := True;
End;
Procedure ImportAscIIData(InFileName : String);
Var
WorkSpace : IWorkSpace;
dProj : IProject;
Proj : IProject;
ProjDoc : IServerDocument;
PcbLibDoc : IServerDocument;
SchLibDoc : IServerDocument;
pLib : IPCB_Library;
sLib : ISch_Document;
DefFP : IPCB_Component; // default initial blank footprint
DefSY : ISch_Component; // default initial blank symbol
SavePath: String;
InFile : TextFile;
Errors : TStringList;
inp, tag : String;
Begin
SavePath := LeftOf(InFileName, '.');
Errors := TStringList.Create();
WorkSpace := GetWorkSpace;
If WorkSpace = Nil Then Begin
ShowMessage('Nil WorkSpace');
Exit;
End;
dProj := WorkSpace.DM_FocusedProject();
// create integerated library documents
If InitLibDocs(SavePath, Proj, ProjDoc, PcbLibDoc, SchLibDoc, pLib, sLib) = False Then Begin
ShowMessage('Error initializing library');
Exit;
End;
Proj.DM_SetAsCurrentProject();
// get the original blank footprint for later deletion when we are done
DefFP := pLib.CurrentComponent;
// get the original blank symbol for later deletion when we are done
DefSy := sLib.CurrentSchComponent;
// start importing data
AssignFile(InFile, InFileName);
Reset(InFile);
While Not EOF(InFile) Do Begin
ReadLn(InFile, inp);
If VarIsNull(inp) Then Continue;
StrChop(inp, ' ', tag, inp);
tag := Trim(tag);
Case tag Of
'StartFootprints': Begin
ImportFootprints(InFile, pLib, Errors, InFileName);
End;
'StartComponents': Begin
ImportComponents(InFile, sLib, Errors);
End;
'': Continue;
End;
End;
CloseFile(InFile);
// delete the original default blank footprint
If Not VarIsNull(DefFP) Then Begin
pLib.DeRegisterComponent(DefFP);
pLib.RemoveComponent(DefFP);
End Else Begin
ShowMessage('DefFP was Nil');
End;
// delete the original default blank symbol
// NOTE: TODO: looks broken; does nothing noticable
If Not VarIsNull(DefSY) Then Begin
//ShowMessage('trying to delete DefSym "' + DefSy.LibReference + '"');
sLib.UnRegisterSchObjectFromcontainer(DefSY);
sLib.RemoveSchObject(DefSy);
//DefSY.Container.RemoveSchObject(DefSy);
End Else Begin
ShowMessage('DefSym was Nil');
End;
// update views?
pLib.Board.ViewManager_FullUpdate();
// Refresh symbol library.
sLib.Graphicallyinvalidate();
// save files again
ProjDoc.DoFileSave(cDocKind_IntegratedLibrary);
PcbLibDoc.DoFileSave(cDocKind_PcbLib);
SchLibDoc.DoFileSave(cDocKind_SchLib);
// set the original project back to its focus
If dProj <> Nil Then Begin
dProj.DM_SetAsCurrentProject();
End;
ShowMessage('Done with "' + SavePath + '"');
End;
相关阅读
我们在利用ftp的storeFile（）上传存储文件的时候，为了让上传速度提升，建议采用添加缓冲区的方式，根据上传文件的大 小，设置
Windows远程时无法复制文件--杀进程rdpclip.exe，然后再
1.远程登陆到主机上2.任务管理器杀进程rdpclip.exe3.【开始】，搜索rdpclip.exe，点击运行此时重新复制文件，可以跨主机复制啦原以为是
文章为作者经历一个项目后对配置文件的思考总结，希望能够给你一些启发。一、为什么要了解配置文件？配置文件是技术童鞋在开发过程中
words.srt代码 1 00:00:00,0 --> 00:00:10,540 旅行有起点也总有终点，旅行是结束也是重生。 生活并未给我们放纵和沉溺的机会，那
1.文件偏移 通常调用read或write每读写一个文件，就会改变文件的读写位置。在linux中同样可以使用lseek函数来修改文件偏移量，即读